OTRATTW
HomeAbout UsProductssearchContact
  
Order status View Order Status Checkout Checkout Email Email store
Search our store   
OTRATTW
P.O. Box 425
Cupertino, CA 95015
(408)253-5337
Email Us

 

Home » Rocker Switch Bodies » All Products

 Checkout

 
Product ID: V1BAA80B-00000-000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF switch.
  • Single independently wired 24 volt incandescent switch.
  • Barriers between terminals.
  • Rated 15A @ 24V.
Price: $8.00

 
Product ID: V1BAB80B-00000-000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF switch.
  • Single 24 volt incandescent light ON when switch is turned ON.
  • Rated 15A @ 24V.
  • Barriers between the terminals.

Price: $8.50

 
Product ID: V1C1J77B-00000-000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF switch.
  • Two incandescent lights.
  • Upper light is ON when switch is turned ON.
  • Lower light independently wired
  • No rear barriers between terminals.  VCH housing connectors can be used.
  • Same lighting configuration as ARB.
  • Rated 20A @18V.
  • 1/3 dimmer than the 12V incandescent lights when used in a 12 volt system.

Price: $9.50

 
Product ID: V1D1A70B-00000-000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF switch.
  • Single independently wired 18 volt incandescent switch.
  • No barriers between terminals.
  • Rated 20A @ 12V.
Price: $7.75

 
Product ID: V1D1B60B-00000-000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF switch.
  • Single incandescent light.
  • No barriers between terminals.
  • Rated 20A @ 12V.
Price: $7.50

 
Product ID: V1D1G66B-00000.000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF switch.
  • Two incandescent lights.
  • Upper light independently wired
  • Lower light ON when the switch is turned ON.
  • No rear barriers between the terminals.
  • Rated 20A @12V.
Important Note:  If the upper light on this switch is to be attached to the dash light circuit, it is not recommended to install this switch into the OEM switch panels on a Jeep Wrangler TJ, or any application where the top of the switch will be angled back towards the driver and/or passengers.  There is a possible risk of expose to the bare light bulb due to the small gap between the top of the rocker and the switch body.
Price: $9.15

 
Product ID: V1D1J66B-00000-000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF switch.
  • Two incandescent lights.
  • Upper light is ON when switch is turned ON.
  • Lower light independently wired
  • No rear barriers between terminals.  VCH housing connectors can be used.
  • Same lighting configuration as ARB.
  • Rated 20A @12V.
Price: $9.45

 
Product ID: V1D1S00B-00000-000
Manufacturer: Carling Technologies

Details 

  • Sealed rocker switch, body only.
  • No rocker.
  • Non-lighted.
  • Rated 20 AMP @ 12V
  • No rear plastic barrier
Price: $6.00

 
Product ID: V1DAB60B-00000-000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF switch.
  • Single incandescent light ON when switch is turned ON.
  • Rated 20A @ 12V.
  • Barriers between the terminals.

Price: $7.50

 
Product ID: V1DAF76B-00000-000
Manufacturer: Carling Technologies

Details 

  • SPST ON/OFF.
  • Two incandescent lights.
  • 18 volt upper light can be connected to the dash light circuit.  (the 18 volt incandescent light will produce about 1/3 less light than a standard 12 volt incandescent light when used in a 12 volt circuit)
  • 12 volt lower light ON when the switch is turned ON.
  • Rear barriers between the terminals.
  • Rated 20A @12V.
Important Note:  If the upper light on this switch is to be attached to the dash light circuit, it is not recommended to install this switch into the OEM switch panels on a Jeep Wrangler TJ, or any application where the top of the switch will be angled back towards the driver and/or passengers.  There is a possible risk of expose to the bare light bulb due to the small gap between the top of the rocker and the switch body.
Price: $9.15

« Previous | 1 | 2 | 3 | »


Shopping cart  Shopping cart
0 Product(s) in cart
Total $0.00
» Checkout
News


Contura V rockers


Please allow 3 to 4 business days for laser etch rockers orders to be completed. Custom orders require a minimum of 7 business days.

Reminder

We will be closed October 30st through November 2nd for the SEMA Show.

© Copyright 2008
OTRATTW
by Leapfrog Studios

PayPal
home | about us | products | search | view cart | contact us